Steel Workbenches & Welding Benches

Workbenches, welding benches, drawer benches and long benches. Our standard size is 1800 × 750 × 900 mm, with shorter and longer sizes on every design. Built heavier than anything you'll find at the big box store.

Anvil: All-steel heavy-duty workbench

6 mm steel plate on 50 mm square tube legs. Hit it, weld on it, bolt a vice to it. It won't care.

  • 6 mm steel plate top
  • 50 × 50 mm square tube legs
  • Full-size lower shelf
  • Pre-drilled for a bench vice
  • Levelling feet

Sizes: 1500 × 750 mm $1,040, 1800 × 750 mm (standard) $1,190, 2400 × 750 mm $1,490. Lead time 1–2 weeks.

Ironbark: Hardwood top workbench

A thick laminated Australian hardwood top on a welded steel frame. It's kinder on tools and still strong enough for anything.

  • 40 mm laminated hardwood top
  • Welded steel frame
  • Hardwood lower shelf
  • Oiled finish
  • Levelling feet

Sizes: 1500 × 750 mm $1,120, 1800 × 750 mm (standard) $1,290, 2400 × 750 mm $1,640. Lead time 1–2 weeks.

Lockup: Drawer and cupboard workbench

A heavy bench with a bank of full-extension drawers and a lockable cupboard, so the tools stay where you left them.

  • 5 full-extension drawers
  • Lockable cupboard
  • 3 mm steel top
  • Ball-bearing runners rated 45 kg
  • Outlaw Red handles

Sizes: 1800 × 750 mm (standard) $1,890, 2400 × 750 mm $2,290. Lead time 2–3 weeks.

Roller: Mobile workbench on castors

A tough bench on lockable castors. Roll it to the job, lock the wheels and get to work.

  • Four 125 mm lockable castors
  • 5 mm steel top
  • Lower shelf for machines
  • Vice mounting plate
  • Push handle

Sizes: 1200 × 600 mm $990, 1500 × 750 mm $1,140, 1800 × 750 mm (standard) $1,290. Lead time 1–2 weeks.

Jig: Fixture welding table, 16 mm hole grid

A thick fixture table with a precision 16 mm hole grid. Clamp anything, anywhere, and keep your builds square.

  • 12 mm steel top, machined flat
  • 16 mm holes on a 50 mm grid
  • Heavy legs with adjustable feet
  • Compatible with standard 16 mm clamps
  • Earth clamp tab

Sizes: 1200 × 800 mm $1,690, 1500 × 1000 mm $2,190, 1800 × 1000 mm (standard) $2,590. Lead time 2–3 weeks.

Galley: 304 stainless prep bench

A TIG-welded 304 stainless bench for kitchens, butchering, brewing or fishing. It's hygienic, tough and easy to clean.

  • 304 stainless steel throughout
  • TIG-welded, polished joints
  • Under shelf
  • Adjustable bullet feet
  • Optional splashback

Sizes: 1500 × 600 mm $1,390, 1800 × 700 mm (standard) $1,590, 2400 × 700 mm $1,990. Lead time 2–3 weeks.

Toolroom: Workbench with pegboard backboard and light

The full setup in one hit. A heavy steel bench with a pegboard backboard, a top shelf and an LED light bar, so every tool has a spot and you can actually see what you're doing.

  • 5 mm steel plate top
  • Steel pegboard backboard
  • Top shelf with LED light bar
  • Full-size lower shelf
  • Vice mounting plate

Sizes: 1200 × 600 mm $1,290, 1500 × 750 mm $1,440, 1800 × 750 mm (standard) $1,590. Lead time 2–3 weeks.

Drop Zone: Fold-down wall-mounted bench

For the garage that's already full. Bolts to the wall, folds down on heavy chain and hinged legs when you need it, and folds flat when the car or bike comes back in.

  • 4 mm steel plate top
  • Heavy chain and hinged support legs
  • Folds to under 150 mm deep
  • Wall brackets and fixings included
  • Locking pin when folded up

Sizes: 1200 × 600 mm $690, 1500 × 600 mm $790, 1800 × 600 mm (standard) $890. Lead time 1–2 weeks.

Bead: Welding bench with gas bottle holder

A proper welding station. Thick plate top you can clamp to and weld on, a chained bottle holder on the side, a clamp and torch rack on the back and a shelf underneath for the welder.

  • 10 mm steel plate top
  • Chained gas bottle holder
  • Rear clamp and torch rack
  • Lower shelf for the welder
  • Earth stud welded to the frame

Sizes: 1200 × 750 mm $1,190, 1500 × 750 mm $1,390, 1800 × 900 mm (standard) $1,590. Lead time 2–3 weeks.

Tack: Portable folding welding bench

A welding bench that goes where the job is. Slotted plate top for clamps, legs that fold flat and carry handles, so it lives in the ute and sets up in a minute.

  • 8 mm slotted steel plate top
  • Fold-flat legs with locking pins
  • Carry handles on both ends
  • Fits in a standard ute tray
  • Earth stud welded on

Sizes: 900 × 600 mm $590, 1200 × 600 mm $690, 1200 × 750 mm $790. Lead time 1–2 weeks.

Bulldog: Steel workbench with 5-drawer stack

A heavy bench with a built-in five-drawer stack, so spanners, sockets and consumables live right where you work. Full-extension drawers and a lower shelf for the bigger gear.

  • 6 mm steel plate top
  • 5 full-extension drawers, 50 kg each
  • Lockable drawer stack
  • Lower shelf
  • Vice mounting plate

Sizes: 1500 × 750 mm $1,490, 1800 × 750 mm (standard) $1,690, 2100 × 750 mm $1,890. Lead time 2–3 weeks.

Long Haul: Extra-long steel workbench, 2.4 to 3.6 m

For when 1800 mm isn't enough. Six heavy legs, cross bracing and a full-length shelf. Lay out full lengths of steel, build trailers or run a whole production line down one bench.

  • 5 mm steel plate top
  • Six legs with cross bracing
  • Full-length lower shelf
  • Levelling feet
  • Bolt-down holes in every foot

Sizes: 2400 × 750 mm $1,490, 3000 × 750 mm $1,790, 3600 × 900 mm $2,190. Lead time 2–3 weeks.

Titan: Industrial bench, 20 mm plate, 2000 kg

For engine rebuilds, gearbox work and heavy engineering. A 20 mm plate top on 100 mm square legs with bolt-down feet. Drop a diff on it and it won't even notice.

  • 20 mm steel plate top
  • 100 × 100 mm square tube legs
  • Heavy cross bracing
  • Bolt-down foot plates
  • Lower shelf, 500 kg rated

Sizes: 1800 × 900 mm $2,490, 2400 × 900 mm $2,990, 3000 × 1200 mm $3,990. Lead time 3–4 weeks.

Platen: 25 mm platen table for heavy fabrication

A heavy fabrication platen for jigging, bending and building big steel. 25 mm plate with a grid of holes and slots for dogs and clamps, on a frame that stays flat under serious weight.

  • 25 mm steel plate top
  • Hole and slot grid for dogs and clamps
  • Machined top, checked flat
  • Heavy beam frame with levelling feet
  • Clamp and dog kit available

Sizes: 1500 × 1000 mm $3,490, 2000 × 1000 mm $4,490, 3000 × 1500 mm $6,990. Lead time 4–6 weeks.

Need something different? Start a custom build

Service area: Australia-wide